HSD ES915 - The Tool-Holder is Not Locked; The Tool-Holder is Not Expelled; Lack of Pressurisation; Sensor Output Issues

HSD
5801H0056 ______________________________________________________________ 140/181
7.
Carefully insert the cylinder unit
8.
Block the cylinder unit, using the six fixing
screws (with a tightening torque of 7 Nm with
cross-tightening)
919:5x100
9.
Reinsert the casing of the electric fan, and
tighten the four screws on the sides of the
casing, as shown in the figure