HSD ES929 User Manual

181 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Instructions for use

HSD

MECHATRONIC

DIVISION

5801H0056

EN

Rev.02

5801H0056 Rev.02 __________________________________________________________ 1/181

ES884 – ES888

ES915

ES919 – ES929 – ES939

ES983 – ES988

Table of Contents

Questions and Answers:

G
grantmadisonAug 6, 2025
Why is my HSD ES929 Tools electrospindle not rotating?
- W
  William UnderwoodAug 6, 2025
  The electrospindle might not be rotating due to several reasons: There could be no power supply, so check the mains voltage, connectors, and the integrity of electrical connections. Ensure a tool-holder is properly inserted. The thermal protective device might have tripped; if so, wait for the electrospindle to cool down. Lastly, the sensor S1(ISO30) or the series of sensors (HSK) might be disconnected or faulty, so check their connectors and electrical connections; adjust or replace the faulty sensor if needed.
G
Gregory AdamsAug 22, 2025
What to do if the tool-holder is not locked in my HSD Tools?
- R
  rileyadrianaAug 22, 2025
  If the tool-holder isn't locking, there might be a foreign body between the tool-holder and spindle shaft; remove any foreign matter and clean the area. Ensure the tool-holder cone is the correct type. Also, the collet may not be opening due to lack of pressure; check the required pressure values and the integrity of the pneumatic circuit. Lastly, sensor S2 could be disconnected or faulty; check the connectors and electrical connections, and adjust or replace the sensor if necessary.

HSD ES929 Specifications

General

Brand	HSD
Model	ES929
Category	Tools
Language	English

Summary

Preliminary Information and Safety

Document Overview and Purpose

Safety Warnings and Risk Assessment

Identifies risks associated with electrospindle use, incorrect operation, and maintenance.

Technical Specifications

Electrospindle Technical Data Sheets

Provides detailed technical specifications for different electrospindle models (ES884, ES888, ES915, etc.).

Installation and Initial Start-Up

Pre-Installation Checks and Preparations

Covers checks for transport damage, auxiliary systems, and earthing.

Connection Procedures

Details mechanical, pneumatic, hydraulic, and electrical connection requirements.

General Checks After Installation

Pre-Start-Up Checks

Start-Up Procedures

Operation and Adjustment

Tool Holder and Tool Management

Details tool holder locking, expulsion, cone types, and balancing/speed guidelines.

Sensor and Encoder Systems

Handling Blocked Tools

Maintenance Procedures

Scheduled Maintenance Tasks

Outlines daily, weekly, and monthly maintenance tasks for electrospindles.

Component Replacement

Replacing Shaft Kits

Replacing Encoder and Sensor Components

Troubleshooting

Related product manuals

Preview: HSD ES915