HSM ProfiPack C400 - Intended Purpose and Guarantee; Safety Instructions; Risk of Injury; Risk of Injury During Intake

8 ProPack C400 08/2018
TheProPackC400isexclusivelydesigned
for the manufacture of packaging cushions
made from cardboard.
Thewarrantyperiodforthemachineis
2 years. This guarantee does not cover
wear,damagecausedbyincorrecthandling,
naturalwearandinterventionbythirdpar-
ties.
1 Use for intended purpose, guarantee
 Beforeinitialstart-upofthema-
chine,readtheoperatinginstruc-
tions and keep them in a safe
plate for use at a later date.
Please observe all of the safety
instructionsattachedtothePro-
Pack.
Risk of injury!
Never reach into the slot of the feed
opening.
Risk of injury during intake!
Do not go near the feed opening
withlonghair,looseclothing,ties,
scarves,necklaces,braceletsetc.
Do not process any material that
mayhaveatendencytoformloops,
suchastapes,lacingorsoftplastic
lm.
 KeeptheProPackawayfrom
children. Do not operate the ma-
chinewithoutthepresenceofan
operator.
ISO 7000-1641:
Operations instructions
2 Safety instructions
 SwitchtheProPackoffifitis
damagedornotworkingcorrectly
and before relocating or clean-
ingit,anddisconnectitfromthe
mains.
 Serviceworkmayonlybecarried
out by HSM Customer Service or
by the service technicians of our
contractual partners.
• Makesurethatthemainsplugiswellac-
cessible.
• Beforeyouinsertthemainsplug,make
sure that the voltage and frequency of
yourpowersupplycomplywiththeinfor-
mation on the name plate.
• Make sure that no liquids get into the
ProPack.
• The machine must not be placed near a
radiator or other heat source.
• The ventilation slots must be unobstruct-
ed,andtheremustbeadistanceofat
least5cmbetweentheshredderandthe
wallsandfurniture.
english
Translation of the original operating instructions