8-101 Periodic Maintenance and Adjustment
10. Pour the recommended coolant into
the radiator until it is full, and then install
the radiator cap.
Recommended antifreeze:
High quality ethylene glycol
antifreeze
Containing corrosion inhibitors for
aluminum engines.
Antifreeze and water mixing ratio:
1:1
Total amount:
1.8 L (1.58 Imp qt, 1.90 US qt)
Coolant reservoir capacity
(Up to the maximum level mark):
0.3 L (0.26 Imp qt, 0.32 US qt)
CAUTION:
Hard water or salt water is harmful to the
engine. You may use soft water if you
cannot get distilled water.
11. Start the engine and let it idle for
several minutes. Stop the engine, and then
check the coolant level in the radiator. If it
To Next Page
Loading...