8-143 Periodic Maintenance and Adjustment
3. Check to see if the surface of the speed sensor is coated with
oxidation.
Shutdown switch does not
turn off the engine.
1. Check to see if the shutdown switch is damaged.
2. Check to see if the wires are damaged
3. Check to see if the ECU or the EFI systems are damaged.
Sheet 4: Inspection methods / solutions for common faults in the operational systems.
Steering wheel gap is too
large
1. Check to see if the nuts on the steering column, steering knuckles
and steering stem are damaged or loose. Tighten if necessary.
2. Check and be sure the steering column is NOT damaged.
3. Check to see if the gear clearance on the steering is too large.
4. Check to see if the bearing in the steering knuckle is damaged
Front wheels shake when
driving.
1. Check to see if the main ball stud is damaged.
2. Check and be sure the fastening nuts on the front wheels and the
front wheel axles are loose or damaged.
To Next Page
Loading...