Environment HTC 650 E Classic
30 3.0
9 Environment
HTC products are constructed mainly of recyclable metal and plastic. The main
materials used are listed below.
Warning!
The dust that is sucked up is harmful if inhaled. Follow local regulations and
use breathing protection.
9.1 Chassis
Frame Electro-galvanised steel
Handle Plastic covered steel
Wheels Polyurethane-filled rubber wheels
Cover ABS plastic
Motor Aluminium
9.2 Grinding head
Lower cover Aluminium
Cover ABS plastic
External plate and steel components Electro-galvanised metal
Belts Rubber and polyamide
Other components Untreated steel
9.3 Electrical system
Control cabinet Stainless steel
Cables Copper conductors with PVC covering
9.4 Recycling
Plastic components can be recycled by sorting as hard plastics. Electronics can be
deposited as electronic waste. The machine or machine components can also be returned
to HTC Sweden AB. For recycling and scrapping of components, see the applicable
national regulations for each country.
To Next Page
Loading...
