13
www.htc-oorsystems.com
HTC D60
V 1.0
NO. Icon Function Description
1 Display
Indicates ow (m³ or cfm).
Indicates pressure (total pressure mbar or in Aq).
Filter status, 0% clean lter, 100% blocked lter.
2 On/Standby
Starts up or places the machine in standby mode.
The machine wakes up when power is supplied. To place
the machine into standby mode, hold the button in. To
wake the machine press once.
3 Remote connection Indicates status for DURATIQ remote connection.
4 Accessory off/on Switches the accessory off and on
5
Dust emptying
(accessory, automat-
ic)
Keeps the lter cleaning valve open for a time so that the
dust can fall down in the dust bags.
6
Filter cleaning
(accessory, automat-
ic)
Runs lter cleaning (closes inlet valve and opens lter
cleaning valve) once.
7 Alarm / Warning
Alarm, red LED. The machine cannot be operated due to
an error
Warning, yellow LED. The machine has restricted function-
ality.
8 Menu navigation
Controls menu selection etc.
When you are not in the menus these buttons control other
functions.
Arrow up/down - switches between which value on the
screen is to be dominating (large).
9 Start / stop
Starts and stops the side duct fan.
Automatic phase switching (direction of rotation) of the
side duct fan, In the event of incorrect direction of rotation,
the side duct fan stops, the phases switch and the side
duct fan starts in the correct direction.
5.4 Control panel
To Next Page
Loading...
