HTC D60 - Environment

33
www.htc-oorsystems.com
HTC D60
V 1.0
11. Environment
HTC products are mainly constructed of recyclable metal and plastic.
The main materials used are listed below.
1) If possible, different metals should be separated.
2) If the lter contains any hazardous substance from the grinding dust, it
must be treated as hazardous waste.
For recycling and scrapping of components, see the applicable national
regulations for each country.
Dust extractor
Machine part Material Waste management
Cylinder Metal, powder-coated Metal recycling
Longopac holder Plastic, ABS Plastic recycling/Combustible
Cover Metal, powder-coated Metal recycling
Camlock Metal incl. aluminium Metal recycling 1)
Rotation joint pre-separator Plastic (nylon) Plastic recycling/Combustible
Hose Plastic (PUR) and metal wire Plastic recycling/Combustible
HEPA lter Hepa 13
Metal, glass ber reinforced paper
and hot-melt adhesive
Metal recycling 2)
Pre-lter
Metal, polyester and hot-melt ad-
hesive
Metal recycling 2)
Chassis
Machine part Material Waste management
Frame Metal, powder-coated Metal recycling
Front wheels Metal, plastic and rubber Metal recycling
Back wheels Plastic and rubber Combustible
Electrical system
Machine part Material Waste management
Cables
Copper conductors with Neoprene
and PVC coating
Waste cable
Motor Metal: Steel, aluminium and copper Electronic waste
Electrical components Metal and plastic Electronic waste