9
www.htc-oorsystems.com
HTC D60
V 1.0
3. Machine description
3.1 General information
The machine is a dust extractor with an integrated pre-separator for industrial and building use
intended for the dry vacuuming of dust particles, e.g. concrete, wood, stone etc. The dust extractor
is equipped with a pre-separator, where the majority of the dust is collected instead of being sucked
into the actual vacuum cleaner, as well as a two-stage lter system, a coarse lter followed by a ne
lter.
It is also equipped with a lter cleaning system that unloads the vacuum cleaner's lter increasing the
service life and maintaining the performance of the dust extractor.
To handle the collected dust, a bag system is used on the pre-separator and dust extractor. To pre-
vent bags from being sucked into the pre-separator or dust extractor, they are equipped with a rubber
valve that closes during operation.
The pre-separator can be raised and lowered with a simple movement and easily removed from the
chassis if necessary.
The dust extractor can also be controlled from HTC DURATIQ grinder.
To Next Page
Loading...
