Reconnecting a Bluetooth headset
Normally, you can easily reconnect your headset by switching on Bluetooth on HTC Desire 12, and
then turning on the headset.
However, you might have to connect manually if your headset has been used with another Bluetooth
device.
1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off on page 79.
2. Tap the headset’s name in the Paired Devices section.
3. If prompted to enter a passcode, try 0000 or 1234, or consult the headset documentation to
find the passcode.
If you still cannot reconnect to the headset, follow the instructions in Unpairing from a Bluetooth
device on page 80, and then follow the steps under Connecting a Bluetooth headset on page 79.
Unpairing from a Bluetooth device
1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off on page 79.
2. In the Paired devices section, tap
next to the device to unpair.
3. Tap Forget.
Receiving files using Bluetooth
HTC Desire 12 lets you receive various files with Bluetooth including photos, contact info, and
documents such as PDFs.
Refer to the device’s documentation for instructions on sending information over Bluetooth.
1. Turn Bluetooth on.
See Turning Bluetooth on or off on page 79.
2. On the sending device, send one or more files to HTC Desire 12.
3. If asked, accept the pairing request on HTC Desire 12 and on the sending device. You may
also be prompted to enter the same passcode or confirm the auto-generated passcode on
both devices.
You'll then get a Bluetooth authorization request.
4. Tap Pair.
5. When HTC Desire 12 receives a file transfer request notification, slide the Notifications
panel down, tap the incoming file notification, and then tap Accept.
80 Bluetooth
To Next Page
Loading...
