Phone App 88
■ To end the three-way call, tap End call.
Caller ID Blocking
Caller ID identifies a caller before you answer the phone by displaying the number of the incoming call. If
you do not want your number displayed when you make a call, follow these steps.
1. Tap > .
2. Tap .
3. Enter a phone number.
4. Tap Call.
To permanently block your number, call Virgin Mobile Customer Service.
Call Waiting
When you’re on a call, Call Waiting alerts you to incoming calls by sounding two beeps. Your phone’s
screen informs you that another call is coming in and displays the caller’s phone number (if it is available
and you are in digital mode).
To respond to an incoming call while you’re on a call:
■ Tap > Flash. (This puts the first caller on hold and answers the second call.)
To switch back to the first caller:
■ Tap > Flash again.
Note: For those calls where you don’t want to be interrupted, you can temporarily disable Call Waiting by
tapping before placing your call. Call Waiting is automatically reactivated once you end
the call.
Call Forwarding
Call Forwarding lets you forward all your incoming calls to another phone number – even when your
phone is turned off. You can continue to make calls from your phone when you have activated Call
Forwarding.
Note: Depending on your plan, you may be charged a higher rate for calls you have forwarded.
To activate Call Forwarding:
1. Tap > .
2. Tap .
3. Enter the area code and phone number to which you want your calls forwarded.
To Next Page
Loading...
