EasyManua.ls Logo

HTC Desire 626S - Connect to a Wi-Fi Network Via WPS; Disconnect from a Wireless Network; Wi-Fi Direct

HTC Desire 626S
268 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Connectivity 194
3. Tap next to Wi-Fi.
4. Touch and hold an unsecured WiFi network you want stop being notified about, and tap Block
network notification.
5. To unblock an unsecured WiFi network, touch and hold the network name and tap Unblock
network notification.
Connect to a WiFi Network via WPS
If youre using a WiFi router with WiFi Protected Setup (WPS), you can connect your phone easily.
1. Swipe down from the status bar with two fingers to open Quick Settings.
2. Tap Wi-Fi to turn Wi-Fi on.
3. Tap next to Wi-Fi.
4. Tap > WPS Push, and then press the WPS button on your WiFi router.
Note: To use the WiFi Protected Setup (WPS) PIN method, tap > WPS Pin Entry.
Disconnect from a Wireless Network
Quickly disconnect from a wireless network your phone is connected to.
1. Swipe down from the status bar with two fingers to open Quick Settings.
2. Tap Wi-Fi to turn Wi-Fi on.
3. Tap next to Wi-Fi.
4. You can:
Tap the wireless network that the phone is connected to, and then tap Disconnect.
If you want to remove the settings for this network, touch and hold the network name, and
then tap Forget network.
To connect to another wireless network, see Prevent Notifications from Unsecured Wi-Fi Networks.
Wi-Fi Direct
Use Wi-Fi Direct to connect directly to other Wi-Fi Direct devices simply via Wi-Fi, without an access point
or via the Internet.
1. Swipe down from the status bar with two fingers to open Quick Settings.
2. Tap Wi-Fi to turn Wi-Fi on.
3. Tap next to Wi-Fi.

Table of Contents

Other manuals for HTC Desire 626S

Related product manuals