Wi-Fi connection
To use Wi-Fi, you need access to a wireless access point or “hotspot”.
The availability and strength of a Wi-Fi signal varies depending on objects the Wi-Fi signal has to
pass through (such as buildings or a wall between rooms).
Turning Wi-Fi on or off
1. From the Home screen, tap , and then find and tap Settings.
2. Tap the Wi-Fi On/Off switch to turn Wi-Fi on or off.
3. Tap Wi-Fi to see a list of detected wireless networks.
§
To manually scan for Wi-Fi networks, tap > Scan.
§ If the wireless network that you want is not listed, tap > Add network to manually add it.
Connecting to a Wi-Fi network
1. Turn Wi-Fi on, and check the list of detected Wi-Fi networks.
See Turning Wi-Fi on or off on page 178.
2. Tap a Wi-Fi network you want to connect to.
3. If you selected a secured network, enter the network key or password.
4. Tap Connect. You'll see the Wi-Fi icon in the status bar when connected.
Connecting to a Wi-Fi network via WPS
If you're using a Wi-Fi router with Wi-Fi Protected Setup (WPS), you can connect HTC One (M8)
easily.
1. Turn Wi-Fi on, and check the list of detected Wi-Fi networks.
See Turning Wi-Fi on or off on page 178.
2. Tap > WPS Push, and then press the WPS button on your Wi-Fi router.
To use the
Wi-Fi Protected Setup (WPS) PIN method, tap > WPS Pin Entry.
Logging automatically into an AT&T Wi-Fi hotspot
You can set HTC One (M8) to automatically log into an AT&T Wi-Fi hotspot Wi-Fi that you
regularly use.
1. With two fingers, swipe down from the top of the screen to open Quick Settings.
2. If Wi-Fi connection is off, tap the Wi-Fi tile to turn it on.
3. Tap .
178 Internet connections
To Next Page
Loading...
