HTC Snap - Page 118

118 Getting Connected
To accept a Bluetooth partnership
Ensure that Bluetooth is turned on and in visible mode.
Click Yes when prompted to establish a partnership with the other device.
Enter a passcode (the same passcode that is entered on the device requesting
the partnership) to establish a secure connection and click Next.
Note Click Advanced to change the paired device name and to set the services you
want to use for the paired device.
Click Done.
To change the display name of a Bluetooth device
On the Home screen, click Start > Accessories > Comm Manager > Settings
> Bluetooth.
Click Bluetooth and then on the screen, select a Bluetooth device.
Click Menu > Edit.
Enter a new display name for the Bluetooth device, then click Next.
Click Done.
To delete a Bluetooth partnership
On the Home screen, click Start > Accessories > Comm Manager > Settings
> Bluetooth.
Click Bluetooth and then on the screen, select a Bluetooth device.
Click Menu > Delete, and then click Yes in the confirmation screen.
Click Done.
1.
2.
3.
4.
1.
2.
3.
4.
5.
1.
2.
3.
4.