Using Phone Features 45
To adjust the call volume
Press the VOLUME BUTTONS on the side of the phone.
To enable Call Waiting
Call Waiting should be enabled and supported for you to be notified of an incoming
call when you are using the phone.
On the Home screen, click Start > Settings > Phone > Call Waiting.
After the settings have downloaded from the service provider, select the
Provide call waiting notifications check box and click Done.
To answer another call
Click Answer to take the second call and put the first call on hold.
Do one of the following while you are online with two calls.
To end the second call and return to the rst call, press END/POWER
.
To switch between the two calls, press CENTER OK.
To set up a conference call
Not all service providers support conference call. Contact your service provider for
details.
Either put a call on hold (press CENTER OK) and dial a second number, or,
answer another incoming call during a call.
Click Menu > Conference.
Note If the conference connection is successful, the word “Conference” appears on the
screen.
1.
2.
1.
2.
•
•
1.
2.
To Next Page
Loading...
