116 Exchanging Messages
4. Tap the Servers tab and check if
your device is preset with MMS
server settings.
If there are no preset settings,
tap New and enter the following
information, which you obtained
from your wireless service
provider:
• Gateway. Location of the MMS server, which is usually in the form of an IP
address.
• Port number. HTTP port number used for connecting to the MMS server
and for file transfer.
• Server address. URL address of the server where MMS messages are stored.
• Connect via. Select the connection that your device uses for MMS
messages.
• Send limit. Select the maximum MMS message size allowed by your
wireless service provider.
• WAP version. Select either WAP 1.2 or WAP 2.0, depending on which
one is being used by your wireless service provider.
5. Tap Done.
Notes • If your device already has preset MMS settings, it is recommended that you do not
change these settings. If you change the preset settings, your device may not be
able to send and receive MMS messages.
• If you add several MMS message service providers to the Settings screen, you can
choose one as your default provider. Select the provider's name in the list, then tap
Set As Default.
To Next Page
Loading...
