172 Bluetooth
To accept a Bluetooth partnership
1. Ensure that Bluetooth is turned on and in visible mode.
2.
Tap Yes when prompted to establish a partnership with the other device.
3.
Enter a passcode (the same passcode that is entered on the device requesting
the partnership) to establish a secure connection. The passcode must be
between 1 and 16 characters.
4.
Tap Next.
5.
Tap Done. You can now exchange information with the paired device.
Tips • To rename a Bluetooth partnership, tap and hold the partnership’s name on the
Devices tab of the Bluetooth screen, then tap Edit.
• To delete a Bluetooth partnership, tap and hold the partnership’s name on the
Devices tab, then tap Delete.
9.3 Connecting a Bluetooth Hands-free or Stereo
Headset
For hands-free phone conversations, you can use a Bluetooth hands-free headset
such as a car kit with your device. Your device also supports A2DP (Advanced Audio
Distribution Profile) which allows you to use a Bluetooth stereo headset for hands-
free phone conversations and for listening to stereo music.
To connect a Bluetooth hands-free or stereo headset
1. Make sure that both your device and the Bluetooth headset are turned
on and within close range, and that the headset is visible. Refer to the
manufacturer’s documentation to find out how to set the headset in visible
mode.
2.
On the Home screen, slide to the Settings tab and then tap Menu >
Bluetooth Devices > Devices tab > Add new device.
To Next Page
Loading...
Need help?
General
