260 Managing Your Device
12.4 Using Connection Setup
Connection Setup configures your device’s data connections, such as GPRS, WAP,
and MMS, for you so that you do not need to enter the settings manually onto your
device. All you need to do is to select your network operator, then Connection
Setup does all the configuration for you.
To automatically configure the device’s data connections
The first time you power on your device, or when
you insert a new SIM card and then power on your
device, Connection Setup will display a notification
message to inform you that it will automatically
configure your device’s connection settings.
1. Tap Yes on the notification message.
Note If your SIM card supports multiple network operator profiles, the next message
that appears will display network profile choices. Select the profile you want to
use and tap OK.
2. When prompted to automatically configure your device to the proper
network settings, tap Yes.
Connection Setup configures your device’s data connection settings.
3.
After the Connection Setup completes the configuration, tap Restart.
To manually select the network operator to use for data connections
You can also manually select your network operator from Connection Setup’s
settings screen. Connection Setup will then reconfigure your device’s data
connections settings based on the operator that you selected.
1.
On the Home screen, slide to the Settings tab and then tap All Settings.
2.
On the Connections tab, tap Connection Setup.
3.
Select the network Country and Operator you want to use, then tap OK.
To Next Page
Loading...
Need help?
General
