3. Push the tip all the way into the hole until the tray ejects, and then pull the tray out.
4. Do the following to place your nano SIM card into the tray:
With your nano SIM card's gold contacts facing down, place the card into the SIM holder of
the tray. Make sure to align the cutoff corner to the notch on the holder.
Place your microSD
™
card into the SD holder of the tray. See Inserting the microSD card on
page 19.
5. When reinserting the tray, make sure it is facing up so that your cards don't fall out. Hold the
tray with the outer card holder between your fingers, and then steadily slide the tray all the
way into the slot.
6. Make sure the tray is fully inserted and doesn't protrude from the slot.
17 Unboxing and setup
To Next Page
Loading...
