3. Reattach the front and back pads to the headset. For details, see Reattaching the front and
back pads to the headset on page 17.
Attaching the top strap to the headset band
For added comfort, attach the top strap before wearing the headset. You can adjust the top strap
by using the velcro strip.
You'll need to first remove the front and back pads on the headset. For details, see
Removing
the front and back pads on page 16.
1. Starting from the rear of the headset band, align the hooks of the top strap (side without
the clasp) to its corresponding slots. Gently pull up the strap to hook into place.
2. Align and insert the hooks on the other end of the top strap with the inner slots of the
headset band, and then pull up on the strap to hook into place.
3. Reattach the front and back pads to the headset. For details, see Reattaching the front and
back pads to the headset on page 17.
Cleaning the headset lenses
1. Use the cleaning cloth provided in the box to wipe the lenses.
21 Headset and headphones
To Next Page
Loading...
