Inserting the batteries into the controller
Make sure that the included batteries have been inserted into both controllers before turning
them on.
It is highly recommended to use AA alkaline batteries for the controllers.
1. Gently push down on the icon near the top of the battery cover, then slide and lift to
remove it.
2. Insert 2 AA alkaline batteries into the compartment.
§ Make sure that the positive and negative ends are facing the correct direction.
§ Make sure both batteries are put over the tab in the battery compartment.
3. Replace the battery cover.
If you're not going to use the controllers for an extended period of time, it's recommended that
you take out the batteries.
44 Controllers
To Next Page
Loading...
