What do the controller buttons do?
Controls in VR are set by whatever content you're currently using, but there some controller-
specific functions for power and pairing. Here's what the additional controls do:
Function Button
Turn the controllers
on.
Briefly press the VIVE and Menu buttons.
Turn the controllers
off.
Press and hold the VIVE or Menu buttons for 2 seconds.
Put the controllers in
pairing mode.
Press and hold Menu + Y and VIVE + B for 2 seconds.
If your headset has previously paired with controllers, you will need to use the headset button
or VIVE Manager to forget the controllers before you can pair them again.
What does the LED on the controllers mean?
Depending on the status, the LED on a controller shows the following:
LED
Controller status
Blinking red Battery level is below 15%.
Orange Controller is charging.
Blinking blue Controller is paring with the headset.
Blue Controller is connecting with the headset.
61 Solutions and FAQs
To Next Page
Loading...
