17
6. Upgrade Firmware
Version number and support files list:
Note:
When the phone which version is 1.0.3.71 or older upgrade to 1.0.3.73, phone will
upgrade img_9xx.bin then automatically upgrade fw9xx.rom. fw9xx.rom is all-in-one
firmware file. After upgrading to the 1.0.3.73 firmware, in the next time, phone will only
need upgrade one file fw9xx.rom.
6.1 Configuring HTTP Server
Htek IP Phone supports using FTP, TFTP, HTTP and HTTPS protocols to obtain the
address of provision server. Default way is HTTP. For how to configure a HTTP server, as
follows:
You can download a free HTTP server from http://httpd.apache.org/ or use Microsoft IIS
web server. Then setup HTTP server.
For more information on how to configure TFTP, FTP and HTTPS servers, please refer to
Upgrade through TFTP in page 63, Upgrade through FTP in page 66 and Upgrade
through HTTPS in page 67.
6.2 How to Configuring HTTP Server
Login webpage, “Management” -> “Auto Provision” -> ”Firmware Upgrade” -> “Upgrade
Mode” needs to be set to HTTP. “Firmware Server Path” needs to be set to be a valid URL
of a HTTP server, and server name can be in either FQDN or IP address format. Below
are examples of some valid URLs.
e.g. firmware.mycompany.com:5688/Htek
To Next Page
Loading...
