27
FOR OUR LATEST PRODUCTS & OFFERS VISIT WWW.HTL-WORLDWIDE.COM
EC DECLARATION OF CONFORMITY
Nelson Park Ind. Estate,
Cramlington,
Northumberland
NE23 1WD
United Kingdom
Hydraulic Torque Wrench – HTL-DS, HTL-L, HTL-R, HTL-S & HTL-W
DS-1, DS-3, DS-5, DS-10 & DS-25
L-2, L-4, L-8, L-14 & L-30
R-2, R-4, R-8 & R14
S-2, S-4, S-8, S-14 & S30
W-2, W-4, W-8, W-14 & W-30
This is to certify that the aforementioned equipment fully conforms to the protection
requirements of the following EC Council Directive on the approximation of the laws of the
member states relating to the Safety of Machinery 2006/42/EC by the application of standard
EN ISO 12100: 2010.
This is to certify that the aforementioned equipment fully conforms to the essential safety
requirements of Group II Category 2G cT6 of the following EC Council Directive on the
approximation of the laws of the member states relating to the 94/9/EC: Equipment &
Protective Systems Intended For Use In Potentially Explosive Atmospheres by the
application of standards EN 13463-1: 2009, EN 13463-5: 2011 and EN 15198: 2007. A
technical dossier has been lodged with the following notified body.
CSA Group (EU Notified Body # 0518)
Unit 6 Hawarden Industrial Park
Hawarden, CH5 3US United Kingdom
Name : Mike Johnson Position : Group Technical Manager
Signature :
Date : 22
nd
October, 2015
26
HTL-Operating-Instructions-DS.indd 27 11/04/2017 10:16
To Next Page
Loading...