FOR OUR LATEST PRODUCTS & OFFERS VISIT WWW.HTL-WORLDWIDE.COM
4
Important Safety Instructions
WARNING: Certain safety precautions should be observed to avoid accidents or personal injury. The
following tips will assist you.
• Read All Instructions.
• Keep Work Area Clean and Well Lit.
• Consider Work Area Environment.
Electrical pumps should never be used in any atmosphere which can be considered potentially
volatile. If there is any doubt, use an air pump.
NOTE: Metal to metal contact can cause sparks, precautions should be taken.
• Avoid Premature Tool Starting.
The Pump Remote Control is for the tool operator only. Avoid separate pump and tool operator.
• Stay Clear During Operation.
In most cases, the tool will allow hands free operation.
• Guard Against Electric Shock.
Ensure the pump is properly grounded and the proper voltage is being used.
• Store Idle Tools.
When not in use, tools and accessories should be properly stored to avoid deterioration.
• Use the Right Tool.
Don’t force small tools or attachments to do the job of a larger tool. Don’t use a tool for purposes
not intended. HTL can develop custom accessories for your job to ensure safe and simple
operation. Contact your local HTL representative for more information on our custom engineering
abilities.
• Correct Safety Attire.
When handling operating hydraulic equipment, use work gloves, hard hats, safety shoes, hearing
protection, and other applicable clothing.
• Use Safety Glasses.
• Moving Equipment.
Do not use hydraulic hoses, uni-swivels, pump power or remote cords as means to moving the
equipment.
HTL-Operating-Instructions-DS.indd 5 11/04/2017 10:15
To Next Page
Loading...