EasyManuals Logo

HTP Elite FT Installation, Start-Up, Maintenance, Parts, Warranty

HTP Elite FT
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Elite FT
Residential and
Commercial Boilers
Installation
Start-Up
Maintenance
Parts
Warranty
EFT-55 / EFT-80 / EFT-110
EFT-155 / EFT-199 / EFT-285
EFT-399
Models*
* “LP” Denotes Propane Gas Operation
“PU” Denotes Included Pump
This manual must only be used by a qualied installer / service technician. Read all instructions in this manual before
installing. Perform steps in the given order. Failure to do so could result in substantial property damage, severe
personal injury, or death.
HTP reserves the right to make product changes or updates without notice and will not be held liable for typographical
errors in literature.
NOTE TO CONSUMER: PLEASE KEEP ALL INSTRUCTIONS FOR FUTURE REFERENCE.
272 Duchaine Blvd. New Bedford, MA 02745 www.htproducts.com
LP-387 Rev. 7.3.15
Improper installation, adjustment, alteration, service, or maintenance could void product warranty and cause
property damage, severe personal injury, or death.
Heat Exchanger Bears the ASME “H” Stamp

Table of Contents

Other manuals for HTP Elite FT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HTP Elite FT and is the answer not in the manual?

HTP Elite FT Specifications

General IconGeneral
CategoryBoiler
BrandHTP
ModelElite FT
EfficiencyUp to 95% AFUE
Heat Exchanger MaterialStainless Steel
MountingWall-mounted
DimensionsVaries by model
Fuel TypeNatural Gas, Propane
Boiler TypeCondensing
Ignition TypeElectronic
Heating Capacity50, 000 - 199, 000 BTU/h

Related product manuals