Htzsafe T804 - Other Settings; Pairing New Sensors with Receiver; Sensor Pairing Confirmation

Step 3
Note:please have the sensor close to the plug-in receiver.
Activate the sensor.
flashing slowly
release the button
Volume
(1)How to add additional sensors/receivers to the system
(up to 32 sensors can be added to one or multiple receivers)
Step 1
Plug the receiver into an outlet.
Step 2
Press and hold the “Volume” button for 5 seconds and release the
button when you hear a beep prompt and the indicator light flashes.
3. Other Settings
8
Volume
light up
press and hold the button
for 5 seconds
Volume