Huawei 200 - Installation

3
No.
Port
Description
4K model for up to 4K30 resolution
Installation
The Camera 200 can be placed horizontally, mounted on top of a display (such as TV set or
monitor), wall-mounted, ceiling-mounted, or placed on a tripod.
If the display is thicker than 170 mm or wall-mounted, the Camera 200 cannot be installed on
top of the display.
If the display is 170 mm or thinner, the Camera 200 can be mounted on top of a display or
placed horizontally with an additional L-shaped bracket (not included).
Placed
Horizontally
Place the camera on a flat surface.
If you have to place the camera on a sloping surface, the slope must be less
than 15° for the camera to function properly.
Mounted on
Top of a
Display
Use the L-shaped bracket to secure the Camera 200 on top of the display.
Figure Installation procedure.