Product
Characteristics
Description
High-speed and
reliable wireless
access
l Complies with IEEE 802.11a/b/g/n.
l Supports 2 x 2 MIMO and provides a maximum rate of 300 Mbit/s.
l Supports Wi-Fi Multimedia (WMM) and priority mapping on the
air interface and wired interface.
l Supports wired link integrity check.
l Supports load balancing.
l Supports roaming without service interruption in Fit AP mode.
l Supports AC dual-link backup and VRRP hot backup in Fit AP
mode.
l Uses the latest 802.11n chip to provide higher performance and
wider coverage.
Comprehensive
user access control
capability
l Supports access control lists (ACLs) and implements user access
control based on the user group policy.
l Provides fine-grained bandwidth management for each user.
l Supports user isolation policies.
l Supports unified authentication on the AC in Fit AP mode.
l Identifies the device type according to the organizationally unique
identifier (OUI) in the MAC address, user agent (UA) information
in an HTTP packet, and DHCP options in Fit AP mode.
l The RADIUS server delivers packet forwarding, security, and QoS
policies according to the device type carried in the RADIUS
authentication and accounting packets in Fit AP mode.
High network
security
Supports the following authentication and encryption modes:
l Open system authentication
l WEP authentication/encryption
l WPA/WPA2-PSK authentication and encryption
l WPA/WPA2-802.1x authentication and encryption
l WAPI authentication and encryption
l Supports wireless intrusion detection system (WIDS), including
rogue AP and STA detection, attack detection, STA/AP blacklist
and whitelist.
Huawei AP3010DN-AGN Access Points
Product Description 1 Product Positioning and Characteristics
Issue 01 (2013-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6
To Next Page
Loading...
Need help?
General
