Product
Characteristics
Description
High-speed and
reliable wireless
access
l Complies with IEEE 802.11a/b/g/n/ac/ac Wave 2.
l Supports 2 x 2 MIMO and a maximum rate of 1.267 Gbit/s.
l Supports link aggregation of dual Ethernet ports.
l Supports Wi-Fi Multimedia (WMM) and priority mapping on the
air interface and wired interface.
l Supports wired link integrity check.
l Supports load balancing.
l Supports roaming without service interruption in Fit AP mode.
l Supports AC dual-link backup in Fit AP mode.
l Provides a latest 802.11ac Wave 2 chip with higher performance
and wider coverage.
l Supports airtime scheduling which ensures fairness in channel
occupation time for all users.
Comprehensive
user access control
capability
l Supports access control lists (ACLs) and implements user access
control based on the user group policy.
l Provides fine-grained bandwidth management for each user.
l Supports user isolation policies.
l Supports unified authentication on the AC in Fit AP mode.
l Identifies the device type according to the organizationally unique
identifier (OUI) in the MAC address, user agent (UA) information
in an HTTP packet, and DHCP options in Fit AP mode.
l The RADIUS server delivers packet forwarding, security, and
QoS policies according to the device type carried in the RADIUS
authentication and accounting packets in Fit AP mode.
High network
security
l Open system authentication
l WEP authentication/encryption
l WPA/WPA2-PSK authentication and encryption
l WPA/WPA2-802.1x authentication and encryption
l WAPI authentication and encryption
l Wireless intrusion detection system (WIDS) and wireless intrusion
prevention system (WIPS), including rogue device detection and
countermeasure, attack detection and dynamic blacklist, and
STA/AP blacklist and whitelist
AP4050DN-E
Product Description
1 Product Positioning and Characteristics
Issue 01 (2016-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7
To Next Page
Loading...
Need help?
General
