Huawei AP4050DN-E - 2.4 Determining the Installation Position

Type Color Status Description
Alarm Green Blinking once every
0.25s (4 Hz)
l The software is
being upgraded.
l After the
software is
loaded and
started, the AP
requests to go
online if it works
in Fit AP or
cloud-based
management
mode. The
indicator remains
in this state
before the AP
successfully goes
online
(CAPWAP link
setup).
l The AP works in
Fit AP or cloud-
based
management
mode and fails to
go online
(CAPWAP link
disconnection).
Fault
Red Steady on A fault that affects
services has
occurred, such as a
DRAM detection
failure or system
software loading
failure. The fault
cannot be
automatically
rectified and must be
rectified manually.
AP4050DN-E
Product Description
2 Hardware Structure
Issue 01 (2016-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12