Huawei AP4050DN-E - Page 23

Features Description
Network Features
l Compliance with IEEE 802.3u
l Auto-negotiation of the rate and duplex
mode and automatic switchover between
the Media Dependent Interface (MDI)
and Media Dependent Interface
Crossover (MDI-X)
l Compliance with IEEE 802.1q
l SSID-based VLAN assignment
l DHCP client, obtaining IP addresses
through DHCP
l STA isolation in the same VLAN
l Access control lists (ACLs)
l Unified authentication on the Agile
Controller
l Network Address Translation (NAT)
QoS Features
l Priority mapping and packet scheduling
based on a Wi-Fi Multimedia (WMM)
profile to implement priority-based data
processing and forwarding
l WMM parameter management for each
radio
l WMM power saving
l Priority mapping for upstream packets
and flow-based mapping for downstream
packets
l Queue mapping and scheduling
l User-based bandwidth limiting
l Airtime scheduling
Security Features
l Open system authentication
l WEP authentication/encryption using a
64-bit, 128-bit, or 152-bit encryption key
l WPA2-PSK authentication and
encryption (WPA2 personal edition)
l WPA2-802.1x authentication and
encryption (WPA2 enterprise edition)
l 802.1x authentication, MAC address
authentication, and Portal authentication
l DHCP snooping
l Dynamic ARP Inspection (DAI)
l IP Source Guard (IPSG)
AP4050DN-E
Product Description
4 Product Features (in Cloud-based Management Mode)
Issue 01 (2016-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
18