Huawei AR530 Series - Page 8

4.2 Installing the AR550 Series Industrial Switching Router
Place the router's real panel in front of the DIN rail and ensure that the DIN rail fits in between the fixture
near the top of the router and spring latch near the bottom.
1
Make the router incline forward with the bottom away from the DIN rail, and place the fixture at the rear of
the router on the top of the DIN rail.
Slowly push the router toward the DIN rail to make the spring latch at the rear of the router move down.
The spring latch then bounces back to fix the router on the DIN rail.
2
3
NOTE
Before the installation, ensure that the DIN rail has been secured in position.
The router is placed near the DIN rail for convenient movement.
Installing the Router on a DIN Rail
Use two M4 screws to fix the stainless steel sheet on the mounting kit.
Align the mounting holes on the lower part of the router with the tapped holes on the mounting kit, and
secure the router on the mounting kit with two M4x30 screws.
Use M4 screws to secure the mounting kit in the cabinet.
2
3
4
7
L1 L2
L3
FE5
FE4
FE3
FE2
N
A
RS485-
0
B
A
RS485-
1 DI-0
DI-1
B
GE0
RX TX
GE1
MONI
TO
R
Power Outage Survival
RX TX
FE6
FE7
CONSOLE
1
2
3
4