2
3
Know your Smart Hub Set-up Connect Data Usage Configurations Troubleshoot
Indicator Reference State Description
Power Indicator
White
steady
AC power present
Off No AC power
Network Indicator
Cyan/Blue/
Yellow
Connected to a mobile network
Off No Network Connection
Wi-Fi
Steady Wi-Fi on
Blinking Active data connection
Off Wi-Fi off
LAN/WAN
Indicator
White
steady
Computer Connected to Router
Off Computer Not connected with Router
Network
White More signal bars indicate a stronger signal
Off Low Signal
Power Input Input
Connect Power cable to input and plug adapter into power
outlet. Use only supplied AC adapter.
LAN
Ports
4 LAN
Ports
Connect computer to LAN port using LAN/Ethernet Cable
External
Antenna
Sockets
Antenna
Sockets
Not required for this service
Reset Button Reset
Pressing the reset button will restore smarthub to factory
settings. Refer FAQ.
Power Button
Power on Keep button pressed for 3 seconds to turn on device
Power off Keep button pressed for 3 seconds to turn off device
Wi-Fi Protected
Setup
WPS
button
To connect to router hold the WPS button on the router for
one second to set up a 2.4 GHz WPS connection
Micro SIM
Slot
SIM Slot Insert only micro sim with gold contact facing up
Front View
Top View
Back View
Underside View
Voice calls not supported,
including calls to 911.
To Next Page
Loading...
