Huawei B612 - Wi-Fi Network Connection; Connecting to Wi-Fi and Security

6
7
Step 3: Connect AC adaptor/power cable from Smart Hub to wall power outlet.
Power indicator light should be white.
The following indicators will turn on when the Smarthub has successfully connected to
a network.
Indicator: Cyan/Blue/Yellow: Connected to a mobile network. If indicator is red,
there is no network connection.
White: More signal bars indicate a stronger signal.
No signal bars: Indicate a low level signal. Try moving the Smarthub to another
ocation in your home until you are able to see signal bars.
Power outlet
AC adaptor /Power cable
Step 4: Once the power cable is connected the power indicator light will turn white.
Power On/Off: To power on or off the smarthub, press and hold the power button.
Connecting new devices: If unable to discover the smarthub on your device,
press and release the WPS button on the smarthub. Then check your device,
select the smarthub network via Wi-Fi settings and connect.
Power button
WPS button
Know your Smart Hub Set-up Connect Data Usage Configurations Troubleshoot