Need help?Do you have a question about the Huawei E5172As-22 and is the answer not in the manual?
General| Download Speed | 150 Mbps |
|---|---|
| Upload Speed | 50 Mbps |
| Wi-Fi Standard | 802.11b/g/n |
| Wi-Fi Frequency | 2.4 GHz |
| Number of Ethernet Ports | 1 |
| SIM Card Slot | Yes |
| Type | Mobile Wi-Fi Router |
| LTE Category | LTE Category 4 |
| Frequency Bands | LTE 800/900/1800/2100/2600 MHz |
Introduces the HUAWEI E5172As-22 LTE CPE for home and small office users.
Describes the CPE's use for high-speed internet access for multiple users in home/small offices.
Lists main features including FDD/TDD LTE, DC-HSPA+, HSPA+, HSDPA, HSUPA, UMTS, EDGE, GPRS, WLAN, Ethernet, and IPv6 support.
Details technical specifications including WAN/LAN/WLAN standards, supported frequency bands, memory, and maximum transmit power.
Covers specifications for built-in and build-out antennas, including frequency, impedance, SWR, efficiency, gain, and polarization.
Supports LTE, DC-HSPA+, HSPA+, HSPA, UMTS, EDGE, GPRS, and GSM radio interfaces with detailed data service characteristics.
Supports IEEE 802.11b/g/n standard, enabling wireless Ethernet router functionality.
Provides one RJ45 Fast Ethernet port to connect to computers, switches, or other network devices.
Features one RJ11 TEL interface for connecting a telephone, supporting circuit-switched voice services.
Accommodates a USIM card, typically located under the battery, for cellular network access.
Includes one SMA connector for connecting an external antenna to improve signal reception.
Displays status indicators for Power, WLAN, WPS, LAN, Voice, and Signal strength.
Enables connecting multiple PCs via WLAN or Ethernet to provide data services and form a local area network.
Covers gateway functions (routing, ARP, DNS, ICMP) and NAT/NAPT features for network connectivity.
Circuit-Switched Fallback mechanism for handling incoming/outgoing voice calls when operating in LTE data mode.
Allows configuration of country-specific settings for telephony services via the Web UI.
Supports various GSM and WCDMA voice codecs including EFR, FR, HR, and AMR for high speech quality.
Includes E.164 numbering support and methods for indicating dialed number sequence completion.
Supports services like Call Waiting, Three-way Calling, CLIR, and Call Forwarding for DTMF telephones.
Supports multiple SSIDs (up to 4), allowing separate names and encryption methods for each.
Specifies the country code to ensure correct Wi-Fi frequencies are used according to national regulations.
Supports automatic Wi-Fi channel selection and describes channel policies for different regions (Europe, North America, Japan).
Notifies users about new firmware versions available for the device via Web popup or SMS.
Informs users about entering a roaming state or exceeding data traffic limits via SMS.
Notifies users about system exceptions like loss of coverage or SIM PIN lock via Web popup.
Provides firewall switch, MAC/IP filtering, and URL filtering to protect the network connection.
Supports various user authentication protocols including No Encryption, WEP, WPA-PSK, and WPA2-PSK.
Enables/disables PIN protection, requiring PIN validation upon CPE restart and login.
Supports LTE Category 4, offering downlink rates up to 150 Mbit/s via the LTE air interface.
Details Inter-Radio Access Technology capabilities like PS handover and cell reselection between LTE, WCDMA, and GSM.
Describes methods for software upgrades, including manual HTTP server and TR-069 remote upgrade.
Supports remote management via CPE WAN Management Protocol (CWMP) and TR-069 for software and configuration updates.
Allows preserving running configurations by backing up to a local file for restoration after system failure.
Explains how to reset the CPE to default settings using the Web UI or the physical reset button.
Provides operation logs and important event logs for verifying and positioning problems, storing up to two weeks of data.
Supports SNTP client for synchronizing the device's time with a remote NTP server.
Details user interface parameters for Gateway configuration, LAN, WLAN, and Status settings.
To Next Page