Huawei E5172As-22 - System Log; SNTP; User Interface Parameters

HUAWEI E5172As-22 LTE CPE Product Description
Issue 03 (2013-06-08)
Commercial in Confidence
26
10.5 System Log
Logs are mainly used for safely verifying and positioning problems. E5172As-22 has
the functions of operation logs and important event logs during system operation, and
provides better visualization.
At the same time, the system also records the deep information such as key modules,
network security and so on. The information will display for the terminal user, but the
user can derive the text for inspection or forward it to the operation maintenance
personnel for deep problem analysis via the log deriving function.
Logs have the saving capacity, that is, logs can not be lost even if the device is
powered off. The system can record the log entries of approximate two-week
information in an unrepeatable way.
10.6 SNTP
The E5172As-22 supports SNTP client to synchronize the device’s own time of day
setting with a remote NTP server.
10.7 User Interface Parameters
Table 10-1 describes user interface parameters
Table 10-1 User interface parameters
Item
Description
Gateway
Parameter
configuration
LAN:

DHCP

IP address
WLAN:

Wireless status

SSID

Mode (802.11 b/g/n)

Channel

Hidden SSID

Tx Rate

Authentication (Open System and Shared Key)

Security (WEP, WPA and WPA2)

Access list (MAC)

Country