HUAWEI E5172As-22 LTE CPE Product Description
6 Wi-Fi Services
The E5172As-22 supports IEEE 82.11b/g/n standard, it can be used as a wireless
Ethernet router.
The WLAN interface can be enabled and disabled.
6.1 Multi SSID
The E5172As-22 supports multi SSID (Maximum 4). Each SSID can be set to a
separate SSID name and encryption method. The factory configurations only enable
one SSID and other SSID is turned off by default.
6.2 Country/Region Code
To make sure the E5172As-22 transmits on correct Wi-Fi frequencies according to
national regulations, the country code where the device is used must be stated.
The following country codes are currently supported:
Most of world, for example
Europe (EU)
United States (US)
Canada (CA)
South Africa (ZA)
Australia (AU)
New Zealand (NZ)
Brazil (BR)
China (CN)
Japan (JP)
India (IN)
6.3 Channel Selection
The E5172As-22 supports automatic Wi-Fi channel selection.