5
−
The micro SIM card is not recognized, the PIN has not been entered, or the PIN
verification failed.
− The CPE failed to connect to a wireless network.
− The CPE is overheating. Its network connection is disconnected so the device can cool
down.
○,
3
Wi-Fi indicator
z On: Wi-Fi function enabled
z Blinking: WPS interconnection verification is in progress. This process should not take longer
than 2 minutes.
z Off: Wi-Fi function disabled
○,
4
Voice indicator
z On: Off-hook condition
z Blinking: Incoming call
z Off: On-hook condition
○,
5
Signal indicator
z On: Indicates network signal strength. Full light indicates strong signal.
z Off: No network signal.
○,
6
Micro SIM card slot
Accommodate a micro SIM card.
○,
7
Wi-Fi button
Press and hold for less than 1 second to enable or disable the Wi-Fi function.
Note:
The CPE supports 2.4 GHz and 5 GHz Wi-Fi networks.
○,
8
Reset button
Press and hold for more than 3 seconds to restore the CPE to its factory settings.
Note:
Restoring the default settings of the CPE will override all the previous settings.
○,
9
WPS button
To Next Page
Loading...
