Huawei E5186 - Page 9

Note:
• The device supports USB 1.1 and 2.0 storage devices in FAT16, FAT32,
ext2, and ext3 formats. Storage devices with power supply requirements
exceeding USB standards may not work properly. It is recommended that you
prepare an external power supply in these cases. The device is compatible
with samba-supported USB printers.
• This port cannot be connected to USB host devices, such as computers.
13 – TELEPHONE PORTS (RJ11)
• Thisfunctionalityisnotcurrentlyavailable.
14 – LAN PORTS (RJ45)
• Letsyouconnectyourmodemtocomputers,
switches, or other network devices.
15 – LAN4/WAN PORT (RJ45)
• Connecttocomputer,switch,orothernetwork
device. WAN functionality is not currently
available.
16 – LAN4/WAN INDICATOR
• On:Theportisconnectedtoadevice.
• Blinking:Dataisbeingtransmittedthroughthe
port.
• Off:Nodeviceisconnectedtotheport.
17 – LAN INDICATORS
• On:Theportisconnectedtoadevice.
• Blinking:Dataisbeingtransmittedthroughthe
port.
• Off:Nodeviceisconnectedtotheport.
18 – EXTERNAL ANTENNA PORTS (SMA TYPE)
• Connecttoexternalantennas(optional).
Note: Before you connect an external antenna to the device, remove the
device’s rear cover.