13
Note:
z The dialing button dose not work in the Auto or On Demand mode.
z You can launch the web management page to select the mode of accessing the
Internet.
Establishing the WPS Connection
If the WiFi Clients connected with the device support the WPS, the device can
automatically generate a network key without manually entering. The operation steps of
WPS-PBC (Push button configuration) are as follows.
1. Power on the device.
2. Start the Clients connected with the device.
3. Enable the WPS of the device.
Note: After the WiFi is enabled, press and hold
. When becomes off first
and then fast blinking in blue, the WPS of the device is enabled.
4. Enable the WPS of the Clients.
Note: For the WiFi operations of the Clients see the Clients’ user guide.
To Next Page
Loading...
