Huawei E5830s - Restoring the Factory Defaults

19
Restoring the Factory Defaults
If you forget the changes of some parameter settings, you can restore them to
factory defaults and reconfigure the parameters of the E5.
Press and hold
and
CONNECT
at the same time until the screen is off.
Then you restore the factory defaults.
Note: After factory defaults are restored, all personal configuration settings are
deleted and all web-based management settings and parameters are restored to
their default values.
Tips
If you cannot use the E5 properly, you can try the following ways:

See Help on the web management page.

Restart the E5.

Restore the factory defaults.

Contact your service provider.