24
7. Check that the network adapter of your Client runs properly.
8. If the problem still persists, please consult you service provider.
What can I do if the Client cannot access the WLAN?
1. If there are interferences or shields near the E5, you can adjust the position of
the E5.
2. Check and record the following settings of your Client and your E5: SSID, WEP
type, and key. The SSID of the Client must be ANY or the same as that of the
E5. The WEP type and key of the Client must be the same as that of the E5.
Otherwise, you need to change the settings.
What can I do if I forgot the default IP address of the management
page?
1. You can enter http://e5.home in the address bar and log in to the management
page to obtain the IP address automatically.
2. Restore the factory defaults.
Version: V100R001_01 Part Number: 31010FSR
To Previous Page
Loading...
