Click 4. ‘Network and Sharing Center’.
Under the 5. ‘Tasks’ list on the left, click ‘Connect to a network’.
A new window will pop up. Find the 6. ‘virginmobile’ connection
from the list and double-click on it.
A new window will pop up. Type in the WEP key and click 7. ‘OK’.
After approximately a minute the message 8. ‘Connected’ will
display in the dialog box and an icon will appear in the Windows
Vista notification area.
If you’d prefer step by step instructions with some handy
images for reference, visit our online FAQ’s for more help:
virginmobile.custhelp.com
Wireless configuration for Apple OS X 10.4
If you already use Apple airport, the airport icon will likely appear on
your menu bar.
Click ‘Apple’, then ‘System Preferences’.1.
Double click ‘Network’.2.
If ‘By default, join:’ is set to ‘Automatic’, change it to ‘Preferred 3.
Networks’.
Double click the ‘virginmobile’ connection to configure security 4.
on.
The wireless security box will appear, select ‘WEP 40/128-bit 5.
ASCII’ as the ‘Wireless Security’ type.
Type in the WEP key and click ‘Ok’.6.
To Next Page
Loading...
