15
Daily Use
Power Saving Mode
If the E5 is idle for a period of time, the screen turns off.
If the E5 is using battery power and does not process data transmissions for 30 minutes, it
goes to deep sleep state and Wi-Fi is disabled.
When the E5 is in deep sleep state, press any key to enable Wi-Fi and light up the screen.
Establishing a WPS Connection
If a Wi-Fi client connected to the E5 supports the WPS function, a network key will be
automatically generated without manual input. To establish a WPS connection, perform
the following steps:
1. Power on the E5.
2. Start the client.
3. Enable the WPS function of the E5.
Note: After Wi-Fi is enabled, press and hold
to
To Next Page
Loading...
Need help?
General
