15
Daily Use
Saving Power mode
If no operation is performed on the E5 for a while, the screen is off.
If the E5 has not been accessed for 30 minutes by default, the E5 changes to the deep
sleep state.
When the E5 is in the deep sleep state, you can press any key to activate the Wi-Fi function.
If the E5 is activated, the screen becomes lightened.
Restoring the Factory Defaults
If you forget the changes you made to some settings,
you can choose to restore the factory defaults .
To restore the factory defaults, press and hold the RESET
button until the screen is off. All factory default
settings are successfully restored.
Note: After this operation, all personal configuration settings are deleted and all
To Next Page
Loading...
