Huawei E589 - Restoring Factory Defaults; Factory Reset Procedure

15
Establishing a WPS Connection
If a Wi-Fi client connected to the Mobile Wi-Fi supports the WPS function, a wireless
network key will be automatically generated without manual input. To establish a WPS
connection, perform the following steps:
1
. Power on the Mobile Wi-Fi.
2
. Start the client.
3
. Enable the WPS function of the Mobile Wi-Fi.
Note: After Wi-Fi is enabled, press and hold
until a WPS activation animation is displayed on
the screen to enable the WPS function of the
Mobile Wi-Fi.
4
. Enable the WPS function of the client.
Note: For WPS operations on the client, see the user guide of the client.