Huawei EchoLife HG510

User Manual
EchoLife HG510 Home Gateway Chapter 2 Hardware Description
Huawei Technologies Proprietary
2-3
Label Function
RST
To reset to default settings, Hold the Reset
button for more than 5 seconds and then
release the button.
PWR
Connects to the supplied power cable
LAN1-4
RJ-45 connector: connects the device to your
computer's Ethernet port, or to the uplink port
on your LAN's hub, using the cable provided.
2.3 Connecting the HG510
You need to connect the HG510 to the phone jack, the power
outlet, and your computer or network.
Caution:
Before cable connection, turn off power of your computer(s), LAN
hub/switch (if applicable), and the HG510.
Figure 2-1illustrates the cable connections. Refer to the steps
that follow for specific instructions.