Huawei EchoLife HG510

User Manual
EchoLife HG510 Home Gateway Chapter 3 Configuration Guide
Huawei Technologies Proprietary
3-7
III.
Configure PPP Username and Password
Figure 3-5 Quick Setup – PPP Username and Password
Enter “PPP Username”, “PPP Password”, “PPPoE Service
Name”, and select “Authentication Method”
(AUTO/PAP/CHAP/MSCHAP). The actual parameter is provided by
your ISP,you can contact them to get the detailed information.
The “Dial on demand (with idle timeout timer)” function, if
checked, a new setup parameter “Inactivity Timeout (minutes)
[1-4320]” will appear for the HG510 to tear down the PPP link
automatically if there is no outgoing packet for the programmed period
of time.
The HG510 sets up PPPoE connection automatically when the
PPPoE connection is not set up and users want to send data to ISP.
The user is able to assign some specific ATM PVC(s) to run
PPPoE, when the HG510 has multiple ATM PVC connection.