User Manual
EchoLife HG510 Home Gateway Chapter 3 Configuration Guide
Huawei Technologies Proprietary
3-35
Figure 3-31 Advanced Setup – Firewall – Add new Outgoing IP
Filter
Click
<Add> to creat
e a filte
r to identif
y the outgoi
ng IP tr
affic by
specifying at least one condition below. If multiple conditions are
specified, all of them take effect
II.
Incoming IP Filtering
By default, all incoming IP traffic from the WAN is blocked when
the firewall is enabled. However, some IP traffic can be accepted by
setting up filters.
Refer to “3.4.4 I. Outgoing IP Filtering”, and follow the same
principle to add a new filter rule.
To Next Page
Loading...
